Products: Menzel Industrial Gas Combustion Analyzer

Problem: Detecting and correcting improper air/gas ratios in pre-mixed burner manifolds and gas pipelines Solution: Menzel Industrial Gas Combustion Analyzer

In machines that use gas flames such as pre-dryers, singers, and curing ovens, improper gas/air ratios in the pre-mix can be the source of many problems. If a flame is burning too high or too low, it could mean that the job is not getting done properly. And if the percentage of gas in the combination is too high, you could be unnecessarily wasting a lot of fuel. Until now, it has been difficult to maintain a consistent air/gas ratio that will keep the flame burning at an optimum level. With Menzel's Industrial Gas Combustion Analyzer, the problem is solved.

Standard Features:

Highly sensitive yet durable thermalconductivity cell detects the difference in thermal properties between gas and air. Can handle any range between 0-3% and 0-100% C4 in air or nitrogen.
Lightweight and very portable. The analyzer weighs only 6 lbs.
LCD Digital display shows actual percentage by volume. The user can precisely control the mixture by percentage. Accurate to 2% of full scale.
0-10% Range linear and over 10% slightly non-linear. Maximum deviation is 1-2% full scale C4.
A flow indicator is provided
Powered by a 12V "gel cell". Includes a 115VAC 60Hz recharger. A built-in recharging circuit allows the analyzer to be recharged while in use. A fully charged battery is good for 20 hours of continuous operation.

Optional Features:

NOTE: ALL MENZEL INDUSTRIAL GAS COMBUSTION ANALYZERS ARE FULLY ASSEMBLED AND TESTED PRIOR TO DELIVERY


Brushing and Vacuuming System	Main Product Listing	High-Velocity Singer

Please fill out the section below to request information on Menzel's Industrial Gas Combustion Analyzer

Contact Name:

Please have a Menzel representative contact me.

Click this button to clear the form and start over:


Brushing and Vacuuming System	Main Product Listing	High-Velocity Singer